Economic Bulletin of the National Mining University

 

IssuesSectionsAuthorsKeywords

Article

Issue:2022 №2 (78)
Section:Entepreneurship and economics of enterprise
UDK:330:658.87
DOI:https://doi.org/10.33271/ebdut/78.111
Article language:Ukrainian
Pages:111-122
Title:Formation of the competitive position of a small manufacturing enterprise on the basis of business modeling
Authors:Dobryniuk O. I., Dnipro University of Technology,
Litvinov Yu. I., Dnipro University of Technology
Annotation:Methods. The results were obtained through the use of the following methods: scientific generalization – to determine the essence and problems of development in the field of small business in Ukraine; analysis, systematization and synthesis – in researching the factors of increasing the efficiency of small production enterprises; structural analysis – when determining strategic flexibility in matters of adaptation to changes in the conditions of commodity markets. Results. The general state and trends of the results of small business activity in a specific type of economic activity, namely in the production and trade of a certain category of goods, are determined. The possibilities of developing the competitive position of a small manufacturing enterprise on the basis of business modeling are analyzed, which will allow implementing a systems approach to enterprise management and avoiding the «traps» of a functional approach (marketing; HR; intellectual property; financing; technologies, etc.). Internal opportunities for the formation of a suitable culture are identified, the culture being focused on strategic flexibility in the matter of adaptation to the changing conditions of commodity markets, first of all, updating the priority segments of consumers – the target audience of the enterprise. There is determined the possibility of rapid acquisition of competitive advantages by a small production enterprise through the use of the potential of other market entities. Novelty. The methodical approach to the formation of the competitive position of the subject of a small manufacturing enterprise through the development of its business model in the direction of retail trade with the application of a wide range of solutions in the field of information and communication technologies has gained further development. Thus, the basis for obtaining new scientific results in the field of activity of small manufacturing enterprises is determined by updating the «consumer segments» element and the value of the offer in the direction of retail trade, which is ensured by corresponding changes in other distribution elements of the business model of a small manufacturing enterprise. Practical value. There are substantiated the potential levers for gaining competitiveness by a small manufacturing enterprise through the establishment of interaction with the retail consumer as a target audience and acquisition of the enterprise potential in the field of distribution. 
Keywords:Competitive position, Small manufacturing enterprise, Adaptation, Retail trade, Business modeling, Rubber tires, Consumer segments, Value proposition
File of the article:EV20222_111-122.pdf
Literature:
  • 1. Tabinskyi, V.A., Teliatnyk, V.M., & Simon, A.P. (2017). Problemy ta perspektyvy rozvytku maloho biznesu v Ukraini. «Molodyi vchenyi», 3(43), 848-851.
  • 2. Lutsiak, V.V. (2016). Competitiveness management system for a small production enterprise. Aktualni problemy ekonomiky, (2), 170-179. Retrieved from http://nbuv.gov.ua/UJRN/ape_2016_2_20
  • 3. Vahner, I.M., & Demko, I.I. (2020). Vplyv COVID-19 na ekonomichnyy rozvytok maloho i serednioho biznesu v Ukraini. Visnyk universytetu bankivskoi spravy, (1), 59-66. Retrieved from http://nbuv.gov.ua/UJRN/echp_2021_13_2_5
  • 4. Kolesnyk, V.I. (2021). Deiaki problemy funktsionuvannia maloho biznesu v umovakh pandemii. Ekonomika kharchovoi promyslovosti. T.13, Issue 2, 29-33. Retrieved from http://nbuv.gov.ua/UJRN/echp_2021_13_2_5 doi.org/10.15673/fie.v13i2.2037
  • 5. Tserkovna, A.V., & Karelova, K.S. (2020). Vplyv tsyfrovizatsii na rozvytok maloho i serednioho biznesu v Ukraini. Rynkova ekonomika: suchasna teoriia i praktyka upravlinnia, T.19, Issue 2(45), 328-339. Retrieved from http://nbuv.gov.ua/UJRN/rectpu_2020_19_2_21 doi.org/10.18524/2413-9998.2020.2(45).201486
  • 6. Shvestko, O.V. (2018). Tendentsii ta priorytety providnykh torhovelnykh merezh v upravlinni prodazhem tovariv. Naukovyy visnyk Khersonskoho derzhavnoho universytetu, (15), Part 5, 83-86.
  • 7. Kovalska, L.L., & Rechun, O.Yu. (2018). Rozdribna torhivlia: sutnist, otsinka ta napriamy rozvytku. Ekonomichnyy Forum, (2), 61-67.
  • 8. Krasota, O.V., & Kiriev, I.S. (2021). Osoblyvosti rozvytku maloho pidpryiemnytstva v umovakh porushennia makroekonomichnoi stabilnosti. Efektyvna ekonomika. (2). Retrieved from http://www.econ-omy.nayka.com.ua/pdf/2_2021/100.pdf doi.org/10.32702/2307-2105-2021.2.98
  • 9. Analitychne doslidzhennia vtorynnoho avtorynku Ukrainy. Retrieved from https://eauto.org.ua/news/13-analitichne-doslidzhennya-vtorinnogo-avtorinku-ukrajini
  • 10. Derzhavnyi komitet statystyky Ukrainy. Retrieved from http://www.ukrstat.gov.ua.
  • 11. Kilkist subiektiv velykoho, serednioho, maloho ta mikropidpryiemnytstva za vydamy ekonomichnoi diialnosti (2010-2020). Retrieved from http://www.ukr-stat.gov.ua/operativ/opera-tiv2019/fin/pssg/ksg_vsmm_ek_2010_2020_u.xlsx
  • 12. Rentabelnist operatsiynoi ta usiiei diialnosti pidpryiemstv za vydamy ekonomichnoi diialnosti z rozpodilom na velyki, seredni, mali ta mikropidpryiemstva (2010-2020). Retrieved from http://www.ukrstat.gov.ua/operativ/opera-tiv2021/fin/fin_new/rodp_ek_vsmm_2010_2020_ue.xlsx
  • 13. Vytraty na vyrobnytstvo produktsii (tovariv, posluh) pidpryiemstv za vydamy ekonomichnoi diialnosti z rozpodilom na velyki, seredni, mali ta mikropidpryiemstva (2012-2020). Retrieved from http://www.ukr-stat.gov.ua/operativ/opera-tiv2021/fin/pdp/pdp_ue/vvp_ek_vsmm_2012_2020_ue.xlsx
  • 14. Drabovskyi, A.H., & Іvaniuta, P.V. (2016). Obhruntuvannia metodyky vyznachennia zhyttievoho tsyklu tovaru. Visnyk Vinnytskoho Politechnichnoho Instytutu, Issue 3, 25-32.
  • 15. Business model canvas - Business design tool. Retrieved from https://www.business-modelsinc.com/about-bmi/tools/business-model-canvas/
nike lunar forever 2 mens cheap shoes sale store
  • Economic theory (current issues of modern economic theory, economic history and history of economic thought);
  • International economic relations (theory and practice of international economic relations, globalization problems, specifics of socioeconomic and sustainable development of the countries of the world)
  • Entrepreneurship and economics of enterprise (theoretical and practical issues of development of branches of national economy)
  • Finances (laws and mechanisms of financial market operation, financial support of enterprises)
  • Accounting and audit (research of methodology, methods and organization of accounting, analysis, audit and audit of financial and economic activities of enterprises and the tax system)
  • Environmental management (issues of raising utilization efficiency of environmental management, resources saving issues, problems of search and feasibility study of raw material sources, directions and efficiency of the state economic policy in resource saving and environmental protection)
  • Management (theoretical and practical issues of management in economic activities)
  • Econometrics in management decision making (scientific substantiation of efficient management decision making methods in branch and enterprise economy)
  • Мarketing (theoretical and practical issues of marketing approach to branch and enterprise development)
  • Public administration (the study of state system of economy regulation, functions, management structures of different levels, the issues of organizational and economic mechanism of state support of entrepreneurship, activation of local communities’ activities)
NIKE AIR HUARACHE

Please, note the following instructions to submit your full papers to the journal: the journal will consider previously unpublished papers in Ukrainian or English languages that should relate to the theoretical and practical profile and follow the guidelines:

1. The paper limit is 8–12 pages (single-spaced type), to be submitted electronically via e-mail.

2. For authors with no Dr. Sc. degree in Economics the paper will be submitted with a review by a Dr. Sc. in Economics to justify its novelty and practical value.

3. Each paper must accompany a completed corresponding author form which includes author’s Surname, Name and Patronymic, scientific degree, academic title, work place, position, business and home postal addresses, phone and fax number, e-mail address. Also include the office of Nova Poshta, for the copy of the Bulletin issue with the author’s publication to be sent to.

4. In case the author (authors) wish to get additional copies of the issue, this should be noted separately in the author form.

Article layout

The article starts with UDC index (left aligned, no indentation)

Next line (no line skip) is the title of the article (in capital letters, full page format).

After a line skip are the author’s initials and surname, scientific degree, academic title, place of work or study, address (comma separated). Full page format.

After a line skip is the abstract (1800 characters) in the language of the article. Abstract contains information about specific scientific results obtained in the course of the study, the level of their novelty, propositions concerning their solutions and practical value of the obtained results. In the next line (no indentation) are keywords (10-12 words) in full page format.

After a line skip is the main text (two columns format) which includes the following parts:

problem statement in general and its correlation with important scientific or practical tasks;

analysis of recent papers containing the solution of the above problem for the authors to ground their research (references are required), determination of previously unsolved parts of a general problem discussed in the article;

aim of the article (statement of purpose);

materials and methods of the research with full justification of the received scientific results;

conclusions of the research and perspectives for further scientific development in the sphere.

After a line skip is References (two column format). Bibliographic description is done according to GOST DSTU 7.1:2006 “The system of standards on information, library and publishing service. Bibliographic entry. Bibliographic description. General requirements and rules of composition” (State Commission for Academic Degrees and Titles of Ukraine Bulletin, #3, 2008).

After a line skip are abstracts (1800 characters each) in English languages with keywords in the appropriate language (6-10 words), full page format. Abstracts start with the title of the article (full page format, capitalized), author’s initials and surname, scientific degree, academic title, place of work or study in italics, full page format.

Guidelines:

  • title: Times New Roman – 12 pt, bold, capitalized;
  • subheading: Times New Roman – 12 pt, bold;
  • author’s initials and surname, degree, title, place of work or study, E-mail – 12 pt, italics;
  • main text, UDC – 12 pt;
  • abstracts, keywords – 12 pt;
  • references – 10 pt.

2.5 сm upper and lower margin, 2.0 сm left and right margin, two column format for the main text and references, 0.7 cm between columns. Paragraph indentation – 1.0 cm, single spacing.

Style and format

Formulas are printed in Equation Editor (MathType v. 4–5). Figures in the paper must be included as Microsoft Word object, grouped in a separate window created as “text box” or “Word picture”. Figures must be gray shade or pattern fill. Graphs are accepted in Microsoft Excel or standard graphics editors (Corel Draw, Adobe Illustrator) inserted in the text as objects. If graphic editors are used, the figure can be submitted as separate files linked to the text. Raster graphic objects must be submitted in uncompressed TIFF format with resolution 300 dpi or higher. Images must not be compressed into JPEG or GIF format, as quality loss is inevitable. Schemes with text can be done in the above graphic editors or Microsoft Word, in the latter case every window must be done as text box connected with other boxes by lines or arrows and then grouped. Font size in figures must be 10pt or bigger. Captions should be grouped with figures, font size – 12 pt.

The Bulletin has publication fees of 900 UAH regardless of the number of pages in the article. Additionally, 100 UAH is charged for DOI prefix..

The article is reviewed within two weeks.

The journal is published on: January 30th, March 30th, June 30th, September 30th.

『アディダス』に分類された記事一覧

Address:

Department of Economic Theory and International Economic Relations, NTU "Dnipro Polytechnic", Yavornitsky Avenue, 19, Dnipro, Ukraine, 49005.

 

Telephones: +380 (56) 47-15-66, 380 (97) 115-75-45 - Senior Editor Nina Cherchenko Albertivna.

 

 E-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

30 Winter Outfit Ideas to Kill It in 2020 - Fashion Inspiration and Discovery

More Articles...